Fine lines are visible around active focus point or display turns red when focus point is highlighted: These phenomena are normal for this type of viewfinder and do not indicate a malfunction.

Shooting (All Modes)Camera takes time to turn on: Delete files or folders.Shutter-release disabled:

•Memory card is locked, full, or not inserted (0 28, 35).

•Release locked is selected for Slot empty release lock (0 281) and no memory card is inserted (0 28).

•Built-in flash is charging (0 44).

•Camera is not in focus (0 40).

•CPU lens with aperture ring attached but aperture not locked at highest f-number (0 315).

•Non-CPU lens is attached but camera is not in mode M (0 316).

Only one shot taken each time shutter-release button is pressed in continuous shooting mode: Continuous shooting is not available if built-in flash fires (0 73, 93).

Final photo is larger than area shown in viewfinder: Viewfinder horizontal and vertical frame coverage is approximately 95%.

Photos are out of focus:

•AF-S or AF-I lens is not attached: use AF-S or AF-I lens or focus manually.

•Camera unable to focus using autofocus: use manual focus or focus lock (0 80, 86, 88).

•Camera is in manual focus mode: focus manually (0 88).

Focus does not lock when shutter-release button is pressed halfway: Use A(L) button to lock focus when live view is off and AF-C is selected for focus mode or when photographing moving subjects in AF-A mode (0 86).

Technical Notes 351