Nikon S4400 Error Messages

Error Messages

The following table lists the error messages and other warnings displayed in the

monitor, as well as the solutions for dealing with them.

	Display	Cause/Solution	A
	O(flashes)	Clock not set.	E65
		Set date and time.
	Battery exhausted.	Charge or change battery.	16, 18
		Battery temperature is high.
		Turn off camera, and allow battery to cool down before
	Battery temperature	resuming use. After five seconds, the monitor will turn
		off, and the power-on lamp will flash quickly. After the	23
	high
		lamp flashes for three minutes, the camera will turn off
		automatically. Pressing the power switch also turns off
		the camera.
	The camera will turn	The camera has become hot.
	off to prevent	The camera turns off automatically. Leave the camera	84
	overheating.	off until it has cooled and then turn it on again.
		Camera cannot focus.
Reference	Q(● flashes red)	• Refocus.	30, 31
		Camera cannot perform other operations until saving is	40
		• Focus on another subject positioned at the same
		distance from the camera as the intended subject.
Section	Please wait for the	complete.
	camera to finish		–
		Wait until message clears from display automatically
	recording.
		when recording is complete.
	Memory card is write	Write-protect switch is in “lock” position.	–
	protected.	Slide write-protect switch to “write” position.
		Write-protect switch of Eye-Fi card is in “lock” position.	–
		Slide the write-protect switch to “write” position.
	Not available if Eye-Fi
		Error accessing Eye-Fi card.
	card is locked.
		• Check that connectors are clean.	20
		• Confirm that memory card is correctly inserted.	20

E88