Nikon S4400 manual 208

Troubleshooting

	Problem		Cause/Solution	A
	Date not appearing on	•	The current shooting mode is one that does not
	images even when	•	support Print date.	88, E70
	Print date is enabled.		Date cannot be imprinted on movies.
	Time zone and date
	setting screen appears	Clock battery is exhausted; all settings were
	when the camera is			24, 25
		restored to their default values.
	turned on.
	Camera settings reset.
		Battery temperature is high. Turn off camera and
	Monitor turns off, and	allow battery to cool down before resuming use.
	the power-on lamp	After the lamp flashes for three minutes, the		23
	flashes quickly.	camera will turn off automatically. Pressing the
		power switch also turns off the camera.
		The camera may become hot when used for an
	Camera becomes hot.	extended period of time to shoot movies or send		84
		images using an Eye-Fi card, or when used in a hot
		environment; this is not a malfunction.
	Shooting
	Problem		Cause/Solution	A
Technical		•	When camera is in playback mode, or setting	32
		•	Battery is exhausted.	22
			items or the setup menu are displayed, press the
Notes	No picture taken.		shutter-release button.
		•	When flash lamp flashes, flash is charging.	55
and		•	The subject is too close to the camera. Try	41, 59
			shooting using macro mode, or Scene auto
Index		•	selector or Close-up scene mode.
	Camera cannot focus.		The intended subject is one with which	31
		•	autofocus does not perform well.
			Set AF assist in the setup menu to Auto.	89, E73
		•	Turn camera off and then on again.	23
		•	Use flash.	55
		•	Increase the ISO sensitivity value.	39, E42
		•	Enable vibration reduction or motion detection.	89, E71,
		•		E72
	Images are blurred.		Use BSS (Best Shot Selector).	39, 47,
		•		E43
			Use a tripod to stabilize the camera when	57
			shooting (using the self-timer at the same time is
			more effective).

F8