Nikon S4400 Turning the Camera On and Off

Step 1 Turn the Camera On

Turning the Camera On and Off

•When the camera is turned on, the power-on lamp (green) will light and then the monitor will turn on (the power-on lamp turns off when the monitor turns on).

•To turn off the camera, press the power switch. When the camera is turned off, both the power-on lamp and the display turn off.

•To turn on the camera in playback mode, press and hold the c(playback) button. The lens will not extend.

CPower Saving Function (Auto Off)

If no operations are performed for a while, the monitor will turn off, the camera will enter standby mode, and the power-on lamp will flash. If no operations are performed for approximately another three minutes, the camera will turn off automatically.

To reactivate the monitor while the power-on lamp is flashing, press any of the following buttons:

-Power switch, shutter-release button, A(shooting mode) button, c(playback) button or b(e movie-record) button.

	Flashes
		No
	No operations	operations
	performed	performed
8	0
	50
		3 min
	Camera enters	Camera turns off
	standby mode

Playback and Shooting for Steps Basic

•The time that elapses before the camera enters standby mode can be changed using the Auto off setting in the setup menu (A88).

•By default, the camera enters standby mode in about one minute when you are using shooting mode or playback mode.

•If you are using the optional AC Adapter EH-62G (available separately), the camera enters standby

mode after 30 minutes (fixed). 23