Reference Section

Connecting the Camera to a TV (Playback on a TV)

Operations with TV Connection

While images are displayed full-frame on the TV, the previous or next image can be viewed by dragging your finger across the camera monitor.

Thumbnail playback (A62) and playback zoom (A61) are possible just as with playback mode on the camera.

When the first frame of a movie is displayed, the movie can be played back by holding your finger on the camera monitor and removing it after about 1 second.

If you tap the monitor while playing back a movie, only the control panel is displayed in the monitor. Tap the icons on the control panel to operate the camera (A73).

BNotes About Connecting the HDMI Cable

HDMI cable is not provided. Use a commercially available HDMI cable to connect the camera to a high-definition TV. The output terminal on this camera is an HDMI mini connector (type C). When purchasing an HDMI cable, be sure that the device end of the cable has an HDMI mini connector.

An Image mode (E26) setting of r2272×1704 or higher and a Movie options (E52) setting of eHD 720p (1280×720) or higher are recommended for shooting images or movies that will be played back on a TV via HDMI connection.

BConnecting the Cable

Do not connect the HDMI cable and USB cable to the camera simultaneously.

BIf the Images Are Not Displayed on the TV

Make sure that the HDMI (E61) setting in the setup menu conforms to the standard used by your TV.

E16

Page 132
Image 132
Nikon S800c manual Operations with TV Connection, E16, Connecting the Camera to a TV Playback on a TV, Connecting the Cable