Nikon S800c manual F12, Mode setting of l4608×2592 or

Troubleshooting

	Problem		Cause/Solution	A
		• Movies cannot be edited.		73
		• Select images that support editing functions.		E5
		• Images taken with another make or model of		E5
	Cannot edit images.		camera cannot be edited.
		• Images edited with this camera may not be		E5
			displayed correctly on other cameras and
			cannot be transferred to computers from
			other cameras.
		• Select the correct HDMI option.		75, E61
		• Both HDMI cable and USB cable are		64, 66,
	Images not displayed on		connected to the camera.	E15
	television.	• Memory card contains no images. Replace		16
			memory card. Remove memory card to play
			back images recorded in the internal memory.
		•	Camera is off.	19
		•	Battery is exhausted.	14, 18
	Nikon Transfer 2 does not	• USB cable is not correctly connected.		66
	start when camera is	• Confirm the compatible operating systems.		65
	connected to a computer.	• Camera is not recognized by the computer.		66
		• Refer to help information contained in		68
			ViewNX 2.
		• When printing images taken at an Image		–
			mode setting of l4608×2592 or
			m 1920×1080, the edges of images may be
			cropped, preventing printing of complete
	Edge of printed image is		images. Refer to the documentation included
			with the printer or consult the digital photo
	cropped.
			lab for further details to make sure that the
			printer supports printing at an aspect ratio of
			16:9.
		• Take images at the Image mode setting		53
			other than l4608×2592 or m1920×1080.
		When printing panoramas, the entire image
Tec		may not be able to be printed depending on the
	Cannot print panoramas.	printer’s settings. Additionally, printing may not		–
hn		be possible depending on the printer. See the
ical		documentation included with the printer or
Notes		consult a digital photo lab for details.
and
Inde
x

F12