C Touching an NFC-compatible Smart Device to the Camera for a Wi-Fi Connection

When you use a smart device that is compatible with near field communication (NFC) functions and runs on Android OS, you can establish a Wi-Fi connection and start the “Wireless Mobile Utility” by touching the NFC antenna on the smart device to the Y(N- Mark) on the camera.

To Terminate the Wi-Fi Connection

Perform one of the operations described below.

•Turn off the camera.

•Select Disable Wi-Fiin the Wi-Fi options menu on the camera (except when the camera is operated by remote control).

•Set the Wi-Fi setting on the smart device to Off.

B Notes About Wi-Fi Connection

•Wi-Fi connection operations are disabled in the following situations:

-When the camera is connected to a TV, printer, or computer

-While recording movies

-While the camera is processing data such as saving images or recording movies

-When the camera is connected to a smart device

•Select Disable Wi-Fiin a areas where the use of radio waves is prohibited.

•When Wi-Fi is connected, Auto off is disabled.

•When Wi-Fi is connected, the battery drains faster than normal.

•The Wi-Fi connection is terminated in the following situations:

-When the battery level is low

-When starting movie recording in short movie show mode

C Security Settings

If no security settings (encryption and password) are configured for the camera’s WiFi function, unauthorized third parties may access the network and cause harm.

We strongly recommend performing the required security settings before using the Wi-Fi function.

Use Options in the Wi-Fi options menu (E93) to perform the security settings.

Section Reference

E51