Nikon S9900 Location Data Functions

Problem	Cause/Solution	A
The PictBridge	With some PictBridge-compatible printers, the
startup screen is
	PictBridge startup screen may not be displayed and
not displayed
	it may be impossible to print images when Auto is
when the		47, 54
	selected for Charge by computer in the setup
camera is
	menu. Set the Charge by computer to Off and
connected to a
	reconnect the camera to the printer.
printer.
Images to be	• The memory card contains no images.	–
printed are not	• Remove the memory card to print images in the	7
displayed.	internal memory.
	The camera cannot be used to select the paper size
Cannot select	in the following situations, even when printing from
	a PictBridge-compatible printer. Use the printer to
paper size with	select the paper size.	–
the camera.	• The printer does not support the paper sizes
	specified by the camera.
	• The printer automatically selects the paper size.
Location Data Functions
Problem	Cause/Solution	A
Unable to	• The camera may not be able to identify the
	location in some shooting environments. To use
identify the	the location data functions, use the camera as
location or it	much as possible in an open-air area.	E33
takes time to	• When positioning for the first time or when
identify the	positioning was unable to be performed for about
location.	2 hours, it takes a few minutes to obtain the
	location data.		Technical
Unable to record	When zor yis displayed on the shooting screen,
location data on	the location data is not recorded. Before shooting	E34
shot images.	images, check the location data reception.
Difference	The acquired location data may deviate in some		Notes
between the
	shooting environments. When there is a significant
actual shooting			and
	difference in the signals from the positioning	E33
location and
	satellites, there could be a deviation of up to several		Index
recorded
	hundred meters.
location data.

F13