Slide Show

Press the cbutton (playback mode) Mdbutton MSlide show M

kbutton

Play back images one by one in an automated “slide show.” When movie files are played back in the slide show, only the first frame of each movie is displayed.

1Use the multi selector HIto select Start and press the k button.

•The slide show begins.

•To change the interval between images, select Frame intvl, press the kbutton, and specify the desired interval time before selecting Start.

Slide show

Start

Frame intvl

Loop

Pause

•To repeat the slide show automatically, select Loop and press the kbutton before selecting Start.

•The maximum playback time is up to about 30 minutes even if Loop is enabled.

2Select End or Restart.

•The screen shown on the right is displayed

after the slide show ends or is paused. To exit the show, select Gand then press the kbutton. To resume the slide show, select Fand then press the kbutton.

Operations During Playback

•Use the multi selector JKto display the previous/next image. Press and hold to rewind/fast forward.

•Press the kbutton to pause or end the slide show.

Section Reference

E83