Using the WR-1: The Basics

The instructions that follow describe how to control a single camera using two WR-1 units, one functioning as a transmitter and the other as a receiver.

Step 1: Position the Tx/Rx/OFF Switches

Slide the Tx/Rx/OFF switch for the transmitter to Tx and the switch for the receiver to Rx. The units will turn on and display the information shown below.

Tx (transmitter)

Rx (receiver)

Step 2: Set the Units to the Same Channel

Press 1 or 3 to choose from channels 1 to 15. Transmitters must be set to the same channel as the receivers they control.

8