AFixing Units in Place
The WR-1 can be mounted on the camera accessory shoe as shown at right.
Once the unit is in place, it can be angled as shown at right.
To remove the WR-1, angle it as shown in Figure 1 or 2, and then press the release (q) and slide the unit off the accessory shoe (w). The unit can only be removed when angled as shown.
If desired, the WR-1 can be mounted on a tripod or an optional SK-7 bracket. Using the SK-7 places the WR-1 at the same level as the camera and allows pictures to be taken using the camera’s built-in fl ash or optional fl ash units and other accessories to be mounted on the camera accessory shoe.
DThe Accessory Shoe
The camera’s built-in fl ash can not be used when the WR-1 is mounted on the accessory shoe. If the fl ash pops up automatically, select P, S, A, or M mode and then lower the fl ash to prevent it fi ring.
