Connecting WR-1 Units
Connect the units to the cameras they will be used to control.
1Open the ten-pin terminal cover.
Open the terminal cover as shown.
Ten-pin terminal
2 Connect the supplied ten-pin or accessory terminal cable.
Use the supplied MC-37 cable when connecting receivers to cameras with ten-pin remote terminals, the MC-38 when connecting receivers to cameras with accessory terminals. Keeping the 1 mark on the cable’s ten-pin connector aligned with the white w mark
next to the ten-pin terminal, insert the connector as shown and tighten the screw to lock it in place.
3Connect the cable to the camera.
If the camera is equipped with a ten-pin re-
mote terminal, align the 1 mark on the 
MC-37 connector with the white wmark next
to the camera ten-pin remote terminal and 
insert the connector as shown. Tighten the screw to lock the cable in place.
If the camera is equipped with an accessory terminal, align the 1mark on the MC-38 connector with the 1 mark next to the camera accessory terminal and insert the connector as shown.