AUnits Connected to Cameras

When connected to a camera (0 6), WR-1 units are powered by the camera; batteries are not required.

AStandby Mode

If no operations are performed for the length of time selected for STBY p(0 16), transmitters will enter standby and their displays will turn off to save power. Units that are connected to a camera will turn off automatically when the camera is turned off.

DReceiver Units

To save power when receivers are not connected to a camera, slide the Tx/Rx/OFF switches to OFF when the devices are not in use.

ABattery Level

The battery level for units not connected to cameras is displayed as shown at right; be sure the batteries have sufficient charge (units connected to cameras do not display the battery level). Battery level is shown as follows:

•c: Charge remaining.

•d: Batteries low. Ready spare batteries.

•e: Batteries exhausted. Replace batteries.

To ensure that the display is as accurate as possible, select the correct battery type in the BATTERY menu (0 17). Choose from LR6 (alkaline) and HR6 (NiMH).

5