Synchronized Release

To synchronize the shutters of one or more remote cameras with the shutter on a master camera, attach the receivers to the remote cameras and the transmitter to the master camera. The master camera must be equipped with a ten-pin remote terminal.

1Connect the controllers.

Connect the transmitter (set to Tx) to the master camera (any cam- era with a ten-pin remote terminal) and the receivers (set to Rx) to the remote cameras.

2Configure the controllers.

Pair all controllers and set them to the same channel and group (0 8, 9, 10).

3Set the transmitter to SYNC mode.

Press 4 on the transmitter to enable sync mode and confirm that kappears in the display.

4Take pictures.

The shutters on all cameras will be released when the shutter-re- lease button on the master camera is pressed all the way down.

13