Step 3: Pair the Units
Follow the steps below to pair the units. Units can be paired only with other devices on the same channel.
1Set the units to pairing mode.
Press the MENU button to display the menus, then highlight PAIRING in the LINK MODE menu and press z. Repeat for the second unit.
2Display the PAIRING menus. Highlight PAIRING and press 2. Re- peat for the second unit.
3Select EXECUTE on both units.
Place the units close together, then highlight EXECUTE and press z on both devices si- multaneously.
If pairing is successful, the message at right will be displayed and the LED will flash al- ternately red and green. If the message NO RESPONSE is displayed, repeat Step 3.
The menus will be displayed when pairing is complete. Press the MENU buttons to close the menus.
LED
9