ID Mode

While in pairing mode pairing is used to establish links between units before shooting begins (0 9), in ID mode units automatically link to others with the same name. Note that ID mode is available with WR-1 units only; pairing must be used to link with WR-R10/WR-T10 wireless remote controllers.

1Select ID mode.

Press the MENU button to display the menus. Highlight LINK MODE and press 2, then highlight ID and press zto select ID mode.

2Choose a name.

Highlight ID-NAMEand press 2 to display the text-entry dialog shown at right. Enter a name of up to eight characters using 4 or 2 to position the cursor and 1 or 3 to enter characters; to choose the character type, use

the group buttons (press A for the letters A–Z, B for the numbers 0–9, and C for symbols). Press zto proceed when entry is com- plete.

3Choose a unit ID.

The unit ID (body number) is used to differen- tiate between receivers with the same name: each unit with the same name must have a unique unit ID. Highlight BODY NO. and press 2 to display the dialog shown at right.

Choose a unit ID between 01 and 20 and press z.

4Configure the remaining units.

Repeat Steps 1–3 to configure the remaining units, using the name selected in Step 2 and a unique unit ID for each unit.

23