Nilfisk-ALTO 4300 A-14 /ENGLISH, Filling The Solution Tank, Fuel, Diesel Engine, Gasoline Engine

Models: 4800 4300 5400

1 64
Download 64 pages 35.22 Kb
Page 14
Image 14
A-14 / ENGLISH

A-14 / ENGLISH

FILLING THE SOLUTION TANK

The solution tank ll (3) is located at the left rear corner of the machine and has a 75 gallon (284 liter) capacity. Fill the tank with the proper dilution of cleaning chemical mixed with water according to the manufacturer’s recommendations.

If using a powdered chemical, mix it with water in a bucket before putting it into the machine’s solution tank. NOTE: DO NOT ll the tank past the Maximum Level on the Water Level Gauge (50). NOTE: AXP/EDS machines can either be used conventionally with detergent mixed in the tank or the AXP/EDS detergent dispensing system can be used. When using the AXP/EDS detergent dispensing do not mix detergent in the tank, plain water should be used.

CAUTION!

Use only low-sudsing, non-ammable, non-caustic cleaning chemicals intended for machine application.

FUEL

WARNING!

ALWAYS STOP THE ENGINE BEFORE FILLING THE FUEL TANK.

DO NOT SMOKE WHILE FILLING THE FUEL TANK.

FILL THE FUEL TANK IN A WELL-VENTILATED AREA.

DO NOT FILL THE FUEL TANK NEAR SPARKS OR OPEN FLAME.

USE ONLY THE FUEL SPECIFIED ON THE FUEL TANK DECAL.

On machines with diesel and gasoline engines, a decal near the ller neck (4) shows the proper fuel to use in the machine. Before removing the cap from the tank, wipe all dust and dirt from the cap and from the top of the tank to keep the fuel as clean as possible.

On machines with propane engines, a decal near the tank gives specic information about the proper type of tank to be used on the machine.

DIESEL ENGINE

Fill the tank with Number 2 Diesel Fuel if the machine will be used in an area where the temperature is 30° Fahrenheit (0° Celsius) or higher. Use Number 1 Diesel Fuel if the machine will be used in an area where the temperature is below 30° Fahrenheit (0° Celsius).

NOTE: If the diesel machine runs out of fuel completely, the fuel system must be bled before the engine can be re-started. To avoid this situation, ll the fuel tank when the fuel gauge indicates 1/4 tank. Fuel tank capacity is 11 gallons (42 liters).

GASOLINE ENGINE

FILL THE TANK WITH UNLEADED 87 OCTANE REGULAR GASOLINE. FUEL TANK CAPACITY IS 11 GALLONS (42 LITERS).

Note: Reference the separately supplied engine manufacture’s maintenance and operator manual for more detailed engine specica tion and service data.

PROPANE ENGINE

Mount a standard 33 lb. liquid withdrawal propane tank on the machine, connect the fuel hose and open the shutoff valve on the tank. Wear gloves when connecting or disconnecting the fuel hose. Shut the propane tank service valve OFF when the machine is not in use.

A-14- FORM NO. 56041580 - Captor4300, 4800, 5400 / CR 1100, 1200, 1400

revised 11/07

Page 14
Image 14
Nilfisk-ALTO 4300, 5400 A-14 /ENGLISH, Filling The Solution Tank, Fuel, Diesel Engine, Gasoline Engine, Propane Engine