ENGLISH / A-5

CAUTIONS AND WARNINGS

SYMBOLS

Nilsk-Advance uses the symbols below to signal potentially dangerous conditions. Always read this information carefully and take the necessary steps to protect personnel and property.

DANGER!

Is used to warn of immediate hazards that will cause severe personal injury or death.

WARNING!

Is used to call attention to a situation that could cause severe personal injury.

CAUTION!

Is used to call attention to a situation that could cause minor personal injury or damage to the machine or other property.

Read all instructions before using.

GENERAL SAFETY INSTRUCTIONS

Specic Cautions and Warnings are included to warn you of potential danger of machine damage or bodily harm.

DANGER!

*This machine emits exhaust gases (carbon monoxide) that can cause serious injury or death, always provide adequate ventilation when using machine.

WARNING!

*This machine shall be used only by properly trained and authorized persons.

*While on ramps or inclines, avoid sudden stops when loaded. Avoid abrupt sharp turns. Use low speed down hills. Clean only while ascending (driving up) the ramp.

*To avoid hydraulic oil injection or injury always wear appropriate clothing and eye protection when working with or near hydraulic system.

*Turn the key switch off (O) and disconnect the batteries before servicing electrical components.

*Never work under a machine without safety blocks or stands to support the machine.

*Do not dispense ammable cleaning agents, operate the machine on or near these agents, or operate in areas where ammable liquids exist.

*Do not clean this machine with a pressure washer.

CAUTION!

*This machine is not approved for use on public paths or roads.

*This machine is not suitable for picking up hazardous dust.

*Use care when using scarier discs and grinding stones. Nilsk-Advance will not be held responsible for any damage to oor surfaces caused by scariers or grinding stones.

*When operating this machine, ensure that third parties, particularly children, are not endangered.

*Before performing any service function, carefully read all instructions pertaining to that function.

*Do not leave the machine unattended without rst turning the key switch off (O), removing the key and applying the parking brake.

*Turn the key switch off (O) before changing the brushes, and before opening any access panels.

*Take precautions to prevent hair, jewelry, or loose clothing from becoming caught in moving parts.

*Use caution when moving this machine in below freezing temperature conditions. Any water in the solution or recovery tanks or in the hose lines could freeze.

*Before use, all doors and hoods should be properly latched.

SAVE THESE INSTRUCTIONS

FORM NO. 56041580 - Captor™ 4300, 4800, 5400 / CR 1100, 1200, 1400 - A-5

Page 4 Page 6
Page 5
Image 5
Nilfisk-ALTO 4300, 5400, 4800 manual Symbols, English / A-5
Page 4 Page 6

4800, 4300, 5400 specifications

Nilfisk-ALTO, a recognized leader in cleaning equipment, has developed a range of high-performance industrial vacuums to meet the demanding needs of various industries. Among these models are the Nilfisk-ALTO 5400, 4800, and 4300, each offering distinctive advantages while sharing a robust foundation built on efficiency, durability, and cutting-edge technology.

Starting with the Nilfisk-ALTO 5400, this model is engineered for heavy-duty applications and provides exceptional suction power thanks to its advanced turbine system. With a large capacity for collecting waste materials, the 5400 is particularly adept at handling fine dust and debris in environments such as construction sites and manufacturing facilities. The integrated filtration system not only ensures efficient dust containment but also extends the lifespan of the vacuum by minimizing clogging.

Moving to the Nilfisk-ALTO 4800, this model strikes a balance between performance and versatility. It features a compact design making it easy to transport, while still delivering powerful suction for a wide range of applications. The 4800 is equipped with an effective HEPA filter that captures 99.997% of particles larger than 0.3 microns, ensuring compliance with strict air quality standards. Additionally, its user-friendly controls and ergonomic features enhance operator comfort during prolonged use.

The Nilfisk-ALTO 4300 is designed with smaller spaces in mind, yet offers a surprising level of performance. This model is perfect for light to medium-duty tasks, with an efficient motor that provides solid suction power without excessive noise. It is particularly suitable for cleaning in offices, schools, and retail spaces where disruption needs to be minimized. The 4300’s compact size allows for easy maneuverability and storage, making it an ideal choice for team environments and smaller cleaning crews.

All three models integrate advanced technologies such as the innovative DustGuard filtration system and an easy-to-clean design, which significantly reduces maintenance time and enhances overall operational efficiency. Their construction with durable materials ensures longevity, making them reliable investment choices for businesses focused on maximizing productivity while maintaining a clean and safe working environment.

In conclusion, the Nilfisk-ALTO 5400, 4800, and 4300 are exemplary industrial vacuums that cater to diverse cleaning needs, confirming Nilfisk-ALTO's commitment to quality, innovation, and customer satisfaction.
Top Page Image Contents