USER MANUAL
ENGLISH
MAIN BROOM DISASSEMBLY/ASSEMBLY
CAUTION!
It is advisable to use protective gloves when replacing the main broom because there can be sharp debris between the bristles.
1.Drive the machine on a level ground.
2.Turn the main switch (1) to “0”.
3.Remove the hopper (9).
4.Loosen the handwheels (A, Fig. 5) completely on the left side of the machine.
5.Remove the lid (A, Fig. 6) by grasping it on the points
(B).
6.Grasp the main broom (A, Fig. 7) on the points (B) and (C), then disconnect it from the drive hub (D) by pulling it in the direction shown by the arrow (E); then remove it in the direction shown by the arrow (F).
7.The new main broom must be installed with the bristles rows bent as shown in the fi gure.
8.Install the new broom by performing steps 3 to 6 in the reverse order.
9.Adjust the height of the new broom according to the procedure shown in the previous paragraph.
A
S311354
Figure 5
AB
S311355
Figure 6
CA
D 
E
F
B
S311356
Figure 7
SW 750
146 3080
15
