USER MANUAL

ENGLISH

WARNING!

–Before using the battery charger, ensure that frequency and voltage values, indicated on the machine serial number plate, match the electrical mains voltage.

–Do not pull or carry the machine by the battery charger cable and never use the battery charger cable as a handle. Do not close a door on the battery charger cable, or pull the battery charger cable around sharp edges or corners. Do not run the machine on the battery charger cable.

–Keep the battery charger cable away from heated surfaces.

–Do not charge the batteries if the battery charger cable or the plug are damaged. If the battery charger cable is damaged, contact Nilfisk-Advance Service Center.

–To reduce the risk of fire, electric shock, or injury, do not leave the machine unattended when it is plugged in. Before performing any maintenance procedure, disconnect the battery charger cable from the electrical mains.

–If the machine is not working as it should, has been damaged, left outdoors or dropped into water, return it to Nilfisk-Advance Service Center.

–Do not smoke while charging the batteries.

–Always protect the machine against the sun, rain and bad weather, both under operation and inactivity condition. Store the machine indoors, in a dry place.

–Do not allow to be used as a toy. Close attention is necessary when used near children.

–Use only as shown in this Manual. Use only Nilfisk-Advance's recommended accessories.

–Take all necessary precautions to prevent hair, jewels and loose clothes from being caught by the machine moving parts.

–Do not leave the machine unattended if the main switch is not turned to "0" and without being sure that it cannot move independently.

–Do not use the machine on slopes with a gradient exceeding the specifications.

–Do not wash the machine with direct or pressurised water jets, or with corrosive substances. Do not use compressed air to clean this type of machine.

–While using this machine, take care not to cause damage to other people, and children especially.

–The machine storage temperature must be between 0°C and +40°C.

–The machine working temperature must be between 0°C and +40°C.

–The humidity must be between 30% and 95%.

–Do not use the machine as a means of transport.

–Do not use the machine on slopes with a gradient exceeding the specifications.

–Do not allow the brooms to operate while the machine is stationary to avoid damaging the floor.

–In case of fire, possibly use a powder fire extinguisher, not a water one.

–Do not bump into shelves or scaffoldings, especially where there is a risk of falling objects.

–Adjust the operation speed to suit the floor conditions.

–This machine cannot be used on roads or public streets.

–Do not remove or modify the plates affixed to the machine.

–Do not tamper with the machine safety guards and follow the ordinary maintenance instructions scrupulously.

–If the machine is used according to the instructions, the vibrations are not dangerous. The machine vibration level is less than 2.5 m/s2 (98/37/EEC-EN 1033/1995).

–Use only brooms supplied with the machine and those specified in the User Manual. Using other brooms could reduce safety.

–In case of machine malfunctions, ensure that these are not due to lack of maintenance. Otherwise, request assistance from the authorised personnel or from an authorised Service Center.

–Carefully read all the instructions before carrying out any maintenance/repair procedure.

–To ensure machine proper and safe operation, the scheduled maintenance shown in the relevant chapter of this Manual must be performed by the authorised personnel or by an authorised Service Center.

–If parts must be replaced, require ORIGINAL spare parts from a Dealer or Authorised Retailer.

–The machine must be disposed of properly, because of the presence of toxic-harmful materials (batteries, plastics, etc.), which are subject to standards that require disposal in special centres (see the Scrapping chapter).

SW 750

146 3080 000(1)2006-10 A

5

Page 42 Page 44
Page 43
Image 43
Nilfisk-ALTO SW 750 manuel dutilisation English
Page 42 Page 44

SW 750 specifications

The Nilfisk-ALTO SW 750 is a compact and highly efficient walk-behind scrubber dryer designed for a variety of indoor cleaning applications. Catering to the needs of small to medium-sized facilities, this machine excels in providing deep and effective cleaning while maximizing productivity. With its user-friendly design and advanced technologies, it is an ideal solution for maintenance in schools, shops, warehouses, and healthcare facilities.

One of the standout features of the Nilfisk-ALTO SW 750 is its robust construction and high maneuverability, which allows operators to navigate tight corners and congested areas with ease. The machine is equipped with a 12-volt battery that offers an impressive run time, ensuring that users can complete large cleaning tasks without interruption. The presence of an onboard charger adds to its convenience, allowing for quick and simple recharging between shifts.

The SW 750 utilizes an efficient scrub deck that combines a high-performance brush system with a powerful vacuum system. This dual-action feature ensures that dirt and debris are effectively removed from various surfaces, leaving floors spotless and dry. The machine’s adjustable brush pressure allows operators to customize the cleaning process based on the specific needs of different floor types, whether it be tile, concrete, or carpet.

Innovative technologies are integrated into the Nilfisk-ALTO SW 750 to enhance its cleaning capabilities. The machine includes the Ecoflex system, which provides users the option to adjust the amount of water and detergent used during cleaning. This not only helps in achieving excellent cleaning results but also promotes environmental sustainability by reducing chemical usage. Additionally, the machine features a Smart Key system, allowing for easy access control to prevent unauthorized use.

Another noteworthy characteristic of the SW 750 is its low noise operation, making it suitable for use in noise-sensitive environments. With a noise level significantly lower than many traditional scrubbers, it allows for cleaning operations to continue even during business hours without disturbing customers or staff.

Overall, the Nilfisk-ALTO SW 750 is a versatile and reliable cleaning solution tailored for efficient floor maintenance. Its combination of powerful cleaning performance, ease of use, and innovative technologies makes it an essential tool for professionals looking to maintain cleanliness in various settings. With its focus on user comfort and environmental responsibility, the SW 750 stands out as a leader in walk-behind scrubber technology.
Top Page Image Contents