Nissan Z33-D Automatic window lowering, Opening the TOP, 18Pre-driving checks and adjustments

CEL position and the passenger seat is occu- pied, ask the passenger to sit forward when the top is being opened or closed.

Automatic window lowering

When the soft top operating switch is pressed, the power windows will automatically be low- ered completely. The windows do not rise auto- matically after the top operation is completed. Use the power window switches to raise them.

3-18Pre-driving checks and adjustments

SPA1692

OPENING THE TOP

1.Apply the parking brake and move the selec- tor lever to the P (Park) position (for the automatic transmission model) or the shift lever to the N (Neutral) position (for the manual transmission model).

2.Start the engine.

3.Depress the foot brake pedal.

4.Release the front edge of the top from the vehicle body with the top latch lever.

5.Push OPEN on the soft top operating switch and hold it until the top is fully opened.

•The soft top indicator light will illuminate while the top is in motion. (In about 20 seconds, the opening movement will finish and the indicator light turns off.)

•Windows will automatically be fully opened.

•The passenger seatback will automatically move forward, unless the seatback tilt cancel switch is in the CANCEL position. It will return to the original position after the top operation. (See “Automatic pas- senger seatback tilt function” shown on the previous page of this section.)

6.Release the switch when the top is fully opened. (The indicator light turns off.)

NOTE:

If you release the switch and press it again while the top is being opened, the top will slightly move to the closing direction, then start moving to the opening direction again. The top is designed to move in this way. It is not a malfunction.