Nissan Z33-D owner manual Operation conditions, Seatback tilt cancel switch

SSS0274

Roadster models — Type B

seatback tilt switch. While the switch is held down, the seatback will move backward to the original position that was last selected using the reclining switch (located on the seat cushion). Release the switch to stop the movement.

Operation conditions:

The power seatback tilt switch does not activate under the following conditions.

￿when the passenger seat sliding/reclining switches on the seat cushion are being op- erated.

￿when the seat tilt cancel switch is in the CANCEL position. (See “Seatback tilt cancel

switch” later in this section.)

￿when the passenger seat belt is fastened.

￿when the vehicle speed reaches 4 MPH (7 km/h) and more.

The automatic tilting/reclining movement will be stopped:

￿when any of the above 4 conditions occur.

￿when the power seatback tilt switch (top or bottom) is pushed again.

￿when the seatback is moved with the soft top open/close operation.

When this interruption occurs, you cannot move the seatback backward from the stopped posi- tion with the power seatback tilt switch. Use the reclining switch (on the seat cushion) to select the seatback position.

SSS0275

Seatback tilt cancel switch:

When the seatback tilt cancel switch ￿C is pushed to the CANCEL position, the tilting/reclining operation using the power seat- back tilt switch ￿B will be cancelled. Only the sliding/reclining switches (located on the seat cushion) are operational. Push the seatback tilt cancel switch to the AUTO position to reactivate the power seatback tilt switch.

This cancel switch is linked with the automatic passenger seatback tilt function of the soft top operation. See “Soft top” in the “3. Pre-driving checks and adjustments” section.

1-8Safety — Seats, seat belts and supplemental restraint system