HEATED SEATS (if so equipped)

SIC3002

The seats are warmed by built-in heaters. The switches are located on the center console.

1.Start the engine.

2.Select heat range.

￿1

For high heat, push the

(High) side

 

of the switch.

 

￿2

For low heat, push the

(Low) side of

 

the switch.

 

￿3 For no heat, the switch has a center OFF position between low and high.

The indicator light ￿A in the switch will illuminate when low or high is selected.

The heater is controlled by a thermostat, automatically turning the heater on and off. The indicator light will remain on as long as the switch is on.

3.When the vehicle’s interior is warmed, or before you leave the vehicle, be sure to turn the switch to the OFF position ￿3 .

An optional ventilated net seat has this built-in heater only in the seat cushion part, not in the seatback.

CAUTION

￿The battery could be discharged if the seat heater is operated while the engine is not running.

￿Do not use the seat heater for ex- tended periods or when no one is using the seat.

￿Do not put anything on the seat which insulates heat, such as a blan- ket, cushion, seat cover, etc. Other- wise, the seat may become over- heated.

￿Do not place anything hard or heavy

on the seat or pierce it with a pin or similar object. This may result in damage to the heater.

￿Any liquid spilled on the heated seat should be removed immediately with a dry cloth.

￿When cleaning the seat, never use gasoline, benzine, thinner, or any similar materials.

￿If any abnormalities are found or the heated seat does not operate, turn the switch off and have the system checked by a NISSAN dealer.

Instruments and controls 2-29

Page 93
Image 93
Nissan Z33-D owner manual Heated Seats if so equipped