DRIVE BELTS

1.Visually inspect each belt for signs of unusual wear, cuts, fraying, oil adhesion or looseness. If the belt is in poor condition or loose, have it replaced or adjusted by a NISSAN dealer.

2.Have the belts checked regularly for condi- tion and tension.

SDI1480

JUMP STARTING

If jump starting is necessary, see “Jump starting” in the “6. In case of emergency” section. If the engine does not start by jump starting, the battery may have to be replaced. Contact a NISSAN dealer.

SDI1389A

1.Power steering fluid pump

2.Alternator

3.Crankshaft pulley

4.Air conditioner compressor ￿: Tension checking points

WARNING

Be sure the ignition key is in the OFF or LOCK position. The engine could rotate unexpectedly.

Maintenance and do-it-yourself 8-17

Page 239
Image 239
Nissan Z33-D owner manual Drive Belts, Jump Starting