SSS0301D

Front facingFront facing — step 2

If you must install a child restraint in the front seat, follow these steps:

1.Turn the seatback tilt cancel switch to the CANCEL position. (Roadster models only)

2.Position the child restraint on the front pas- senger seat. Move the seat to the rear- most position. Adjust the head restraint to its highest position (if so equipped). Always follow the restraint manufacturer’s instruc- tions.

The back of the child restraint should be secured against the vehicle seatback. If nec-

essary, adjust or remove the head restraint to obtain the correct child restraint fit. See “Head restraint adjustment” earlier in this section. If the head restraint is removed, store it in a secure place. Be sure to install the head restraint when the child restraint is removed. If the seating position does not have an adjustable head restraint and it is interfering with the proper child restraint fit, try a different child restraint.

SSS0360B

Front facing — step 3

3. Route the seat belt tongue through the child restraint and insert it into the buckle until you hear and feel the latch engage. Be sure to follow the child restraint manufacturer’s in- structions for belt routing.

Safety — Seats, seat belts and supplemental restraint system 1-21

Page 39
Image 39
Nissan Z33-D owner manual Front facingFront facing step