Nissan Z33-D owner manual Reclining for driver’s seat

	SPA1793
￿ Forward and backward	￿ Reclining (for passenger’s seat)
1	2

FRONT POWER SEAT ADJUSTMENT (for Roadster models)

Operating tips

￿The seat motor has an auto-reset overload protection circuit. If the motor stops during operation, wait 30 seconds, then reactivate the switch.

￿Do not operate the power support seat for a long period of time when the engine is off. This will discharge the battery.

Moving the sliding switch forward or backward will slide the seat forward or backward to the desired position.

When sliding the passenger’s seat backward, be careful not to crush items in the seatback pocket against the rear floor box.

￿2 Reclining (for driver’s seat)

Move the reclining switch backward until the desired angle is obtained. To bring the seatback forward, move the switch forward and move your body forward. The seatback will move forward.

The passenger’s seat is equipped with a manual lever for reclining. See “Front manual seat ad- justment” earlier in this section.

The reclining feature allows adjustment of the seatback for occupants of different sizes for added comfort and to help obtain proper seat belt fit. See “Precautions on seat belt usage” later in this section. The seatback may also be reclined to allow occupants to rest when the vehicle is parked.

1-4Safety — Seats, seat belts and supplemental restraint system