
To reject a waiting call
Either let the phone ring, or press the Quit selection key.
To switch between the 2 calls
• Press.
To end the active call
Simply allow the other party to hang up; the call on hold then becomes the active call. OR:
1.Press while in the active call.
2.The network will cause the call on hold to call your phone. Answer this as you would any normal incoming call.
•Send own caller ID with next call
This feature allows you to block caller ID when you call someone (your number will not be displayed on their caller ID). This feature works on a
Note: This feature is only effective when calling to a number that is equipped with Caller ID.
Note: This feature is available only when supported by the wireless network, and may not function if you are roaming.
For more information on activating and using this service, see “Network feature setting” on page 91, and “Send own caller ID when calling” on page 93.
• 3-way conference calls
This network service allows you to talk to two people at the same time.
Note: Check with your service provider to make sure this service is available in your network.
1.Make a call to the first participant as usual.
2.When you’re ready to place a call to the third party, enter the number
and press.
[ 38 ]