Advanced calling features
3.Press
again to connect both parties.
4.To end the call, press 
. This will disconnect both parties. If you only wish to disconnect with one party, have the other party terminate
the call on his/her end.
TIP: You can also dial the third party from the phone book. While in the call, press Options, scroll to Phone book. Press the roller twice. Scroll to the desired entry and press the roller. Scroll to the desired number (if necessary), then press and hold the roller to dial the call.
Placing one of the parties on hold
While all three parties are connected, pressing the
key places the
2nd party to join on hold. Pressing 
a third time returns the 2nd party to the conversation while putting the 1st party on hold.
Note: Once you place one of the parties on hold, you are unable to rejoin all three parties in the conference call.
• Automatic redial
If automatic redial is turned on, your phone makes up to four attempts to connect the call when the system (not the number dialed) is busy.
To turn on automatic redial:
1.Press Menu 4-2-2 (Settings - Call settings - Automatic redial).
2.Highlight On, then press Select.
If the system is busy, you may hear a quick busy signal.
To stop the phone from redialing, press 
.
Note: Automatic redial works when the wireless network is busy. Your phone will not redial to a phone number that is in use.
• Calling card
Call settings |
| 5 |
|
Calling card
If you wish to use a calling card for long distance calls, you must first save your calling card information into your phone. Your phone is equipped to handle up to 4 calling cards.
None
Select | Back |
[ 39 ]
