14.Wrap the Carriage Cable (56) over a 3 1/2” Pulley
(45).Attach the Pulley to the Center Top Frame
(2)with an M10 x 192mm Button Bolt (64) and an M10 Nylon Locknut (62).
15.Attach the end of the Carriage Cable (56) to a
Do not completely tighten the Locknut; it should be tightened so that only two threads of the Cable show past the Locknut, as shown in the inset drawing.
16.Locate the Butterfly Cable (53). Attach the Cable to the Left Butterfly Arm (9) with an M8 x 45mm Shoulder Bolt (81), an M8 Washer (94), and an M8 Nylon Locknut (82).
17.Wrap the Butterfly Cable (53) over a
(46).Attach the
(88)to the Center Upright (3) with an M10 x 58mm Button Bolt (75). Make sure the Cable
Trap is oriented to hold the Cable in the groove of the Pulley.
18.Wrap the Butterfly Cable (53) under a 3 1/2” Pulley (45). Attach the Pulley to the Double “U”- bracket (21) with an M10 x 48mm Button Bolt (74) and an M10 Nylon Locknut (62).
14 |
| 45 |
|
| |
| 56 |
|
| 62 | 2 |
|
| |
|
| 64 |
15 |
|
|
| 56 |
|
| 63 | 56 |
| 19 | 63 |
|
| 19 |
16 | 81 |
|
|
| |
| 53 |
|
| 94 |
|
| 9 |
|
| 82 |
|
17 |
|
|
| 3 |
|
|
| 88 |
| 46 | 75 |
| 53 |
|
18 |
|
|
|
| 53 |
|
| 45 |
| 74 | 62 |
|
| 21 |
10
