NordicTrack NTB49030 user manual Trap is oriented to hold the Cable, Groove of the Pulley

33. Wrap the High Cable (54) over a 3 1/2” Pulley	33
(45). Attach the Pulley inside the Center Top
	62	65
Frame (2) with an M10 x 65mm Button Bolt (86),
two M10 Washers (65), two 12mm Spacers (49),		2
and an M10 Nylon Locknut (62).

65

86

	49	49
	45	54
34. Wrap the High Cable (54) under a 3 1/2” Pulley	34
(45). Attach the Pulley and a Short Cable Trap
(47) at the top hole in the indicated “U”-bracket		54
(19) with an M10 x 54mm Button Bolt (73) and an
M10 Nylon Locknut (62). Make sure the Cable	47	45
Trap is oriented to hold the Cable in the
groove of the Pulley.		73
	62	19

35. Route the High Cable (54) up through the indicat-	35
ed tube on the Center Top Frame (2). Make sure
the Cable is routed over the bolts in the	86	65
Center Top Frame in the manner shown in
	65
step 32.	54	62
Attach a 3 1/2” Pulley (45) inside the Center Top		2
Frame (2), under the High Cable (54), with an
M10 x 65mm Button Bolt (86), two M10 Washers
(65), two 12mm Spacers (49), and an M10 Nylon		45
Locknut (62). Make sure the Cable rests in the
groove of the Pulley.	49	49

36. Attach a 3 1/2” Pulley (45) to the Center Top	36
Frame (2) with an M10 x 48mm Button Bolt (74)
	Bracket
and an M10 Nylon Locknut (62). Make sure the		74 2
High Cable (54) rests in the groove of the	54 45
Pulley.
Route the High Cable (54) through the bracket on
the Center Top Frame (2).
	62

14