4.Identify the Right and Left Uprights (5, 85) by the location of the numbers and the high side of the Upright.
Orient the Right Upright (5) as shown and attach it to the Right Stabilizer (6) with the two M10 x 118mm Carriage Bolts (72) and two M10 Nylon Locknuts (62). Do not tighten the Locknuts yet.
Attach the Left Upright (85) to the Left Stabilizer (not shown) in the same manner.
5.Slide two Weight Stops (36) onto the Weight Carriage (12).
Slide the Carriage Stop (13) and the Weight Carriage (12) onto the Rear Upright (4) as shown.
6.Pull the Pop Pin (61) out as far as it will go and slide the Safety Spotter (11) onto the Rear Upright (4). Engage the Pop Pin into an adjust- ment hole in the Upright.
4 |
|
High |
|
Side |
|
5 |
|
| High |
| Side |
Numbers |
|
| 85 |
| Numbers |
| 62 |
62 | 6 |
| |
| 72 |
5 |
|
36 |
|
| 12 |
| 13 |
| 36 |
| 4 |
6 |
|
| 61 |
| 11 |
| 4 |
| Adjustment |
| Hole |
7
