2.Attach the Rear Upright (4) to the Base (1) with two M10 x 178mm Button Bolts (78), four M10 Washers (65), and two M10 Nylon Locknuts (62).
Make sure the large slot in the Upright is on the indicated side. Do not tighten the Locknuts yet.
3.Attach the Center Upright (3) to the Base (1) with two M10 x 178mm Button Bolts (78), four M10 Washers (65), and two M10 Nylon Locknuts (62).
Do not tighten the Locknuts yet.
2 |
|
|
| 4 |
|
| Large | Small |
| Slot | |
| Slot | |
|
| |
62 |
| 1 |
| 65 |
|
|
| 65 |
|
| 78 |
3 |
|
|
| 3 |
|
62 | 65 |
|
|
| |
|
| 65 |
1 |
| 78 |
6
