NordicTrack NTC59020 user manual ROA Yadapter, HOW to Connect Your VCR

HOW TO CONNECT YOUR VCR

Note: If your VCR has an unused AUDIO OUT jack, see instruction A below. If the AUDIO OUT jack is being used, see instruction B. If you have a TV with a built-in VCR, see instruction B. If your VCR is connected to your home stereo, see HOW TO CONNECT YOUR HOME STEREO on page 16.

A.Plug one end of the audio cable into the jack beneath the console, Plug the other end of the cable ink the adapter. Plug the adapter into the AUDIO OUT jack on your VCR.

B. Plug one end of the audio cable into the jack beneath the console. Plug the other end of the cable into the adapter. Plug the adapter into an RCA Y-adapter (available at electronics stores), Next, remove the wire that is currently plugged into the AUDIO OUT jack on your VCR and plug the wire into the unused side of the Y-adapter, Plug the Y-adapter into the AUDIO OUT jack on your VCR.

ii i]	ROAYadapter i :: -
	Audio Cable AdaPter
	Wire removed from-_>-[:_='-'
	AUDIO OUT jack

t7