Lexicon MC-12 manual Rear-Panelconfiguration, Setup, To set the LFE LIMIT ADJ parameter

MC-12 Setup

LFE LIMITER ADJ 75 to 120dB

SETUP SPEAKERS MANUAL LEVELS CALIBRATION BASS PEAK LIMITERS

LFE LIMITER ADJ

Specifies the output level restriction the MC-12 applies to the LFE output connector.

To set the LFE LIMIT ADJ parameter:

1.Select the LFE LIMIT ADJ parameter. The parameter initally sets to 75dB.

2. Press the	and	arrow buttons to change the parameter
value.

The selected output level restriction is applied when the LFE LIMITER parameter is set to ON.

REAR-PANEL CONFIGURATION

SETUP REAR PANEL CONFIG

Selecting the REAR PANEL CONFIG option displays the REAR PANEL CONFIG menu shown below, to configure the analog audio input connectors as eight (Left/Right) stereo connectors or as five (Left/Right) stereo connectors and one 5.1-channel configuration (Front L/R, Center, Subwoofer, Side L/R)

8 STEREO INPUTS

SETUP REAR PANEL CONFIG 8 STEREO INPUTS

Select the 8 STEREO INPUTS option to configure the analog audio input connectors as eight stereo connectors.

When 8 STEREO INPUTS is selected:

MAIN MENU

MODE ADJUST AUDIO CONTROLS

SETUP

SETUP

INPUTS

SPEAKERS

REAR PANEL CONFIG

DISPLAYS

VOLUME CONTROLS TRIGGERS

LOCK OPTIONS LIVE! CALIBRATION

REAR PANEL CONFIG

8 STEREO INPUTS OR

5 STEREO & 5.1 ANLG

5 STEREO & 5.1 ANLG FOR REAR PANEL CFG

8 STEREO INPUTS FOR REAR PANEL CFG

•All analog audio input connectors are configured as stereo connectors.

•The 5.1-channel connector is not available.

•Input sources that were assigned to the 5.1-channel connector are reassigned to the stereo connector labeled 6.

3-59