Lexicon MC-12 manual Mode Adjust, Liveness, Low Freq Width, Master Level, Mid Rt, Output Levels

MC-12 Mode Adjust

Note:

The LISTENER POS parameter range might extend past the location of the front left and right speakers.

LIVENESS 30ms to 20.2s

Depends on the SIZE parameter setting. The LIVENESS parameter adjusts the amount of effect recirculation. Higher settings mimic more reflective surfaces and increase decay time. Available in NIGHTCLUB and CONCERT HALL modes.

LOW FREQ WIDTH -25 to +25dB

Applies low-frequency spatial correction to the input signal. This correction is applied to uncorrelated input signals below 60Hz. Available in PANORAMA mode.

MASTER LEVEL -5 to +5dB

Adjusts the output level of 2-channel Logic 7-encoded sources. Available in 5.1 2-CHANNEL, DTS(-ES) 2-CHAN, 5.1a 2-CHANNEL modes.

MID RT 24ms to 24.3s

Works with the SIZE parameters to adjust the amount of time required for mid-frequency information to decay below 60dB in level. The full parameter range might not be available depending on the SIZE parameter setting. Available in CHURCH, CATHEDRAL, and all LIVE! modes.

CAUTION!

Setting the BASS RT, MID RT or SIZE parameters to a high value may produce undesirable or damaging audio.

OUTPUT LEVELS

Opens the OUTPUT LEVELS menu, which is used to adjust output levels for the Main Zone audio output connectors labeled Center, Subwoofer L/R, LFE, Side L/R, and Rear L/R. Refer to page 5-32 for more information. Available in all except 2-CHANNEL, MONO, 5.1 2-CHANNEL, 5.1 MONO, DTS (ES) 2-CHAN, 5.1a 2-CHANNEL, 2CH BYPASS, and LIVE! modes.

PANORAMA ON, OFF

When set to ON, Dolby PLII MUSIC and Dolby PLIIx MUSIC listening modes extend the front stereo image to include surround channel signals, which creates a “wraparound” effect with side wall imaging. Available in DPLII MUSIC and DPLIIx MUSIC modes.

Note:

The PANORAMA parameter within the Dolby PLII MUSIC and Dolby PLIIx MUSIC listening modes should not be confused with the separate PANORAMA listening mode (page 5-12).

PRE-DELAY 1 to 100ms, OFF

Adjusts delay time between the direct sound and the onset of rever- beration. Higher settings make the simulated space sound larger. Because some pre-delay is inherent in all source material, you should begin with the parameter set to the lowest setting, then make adjustments accordingly. Available in NIGHTCLUB, CONCERT HALL, CHURCH, CATHEDRAL, and all LIVE! modes.

5-41