Lexicon MC-12 Appendix, Video Input & Output Connectors, Composite & S-videoPerformance, Other

MC-12 Appendix

Video Input & Output Connectors

Video Inputs	•	5 composite (RCA), 8 S-video, and 4 component video (3
		RCA and 1 BNC))
Video Outputs	•	4 composite (RCA, 2 monitor and 2 Record Zone), 2 S-
		video (2 monitor and 2 Record Zone), and 1 component
		(BNC)

Composite & S-video Performance

Compatibility	•	NTSC, PAL, and SECAM
Switching	•	Active
Output Level	•	1.0V peak-to-peak
Impedance		Ω
	• 75
Input Return Loss	•	>40dB
Differential Gain	•	<0.5%
Differential Phase	•	<0.5°
Bandwidth	• >25MHz
K Factor	• <0.3%
Gain	• ±0.15dB
Signal-to-Noise Ratio	•	>70dB
Frequency Response	• 10Hz to 10MHz + 0.1/-0.3dB

Component Video Performance

Compatibility	•	3-channel (Y, Pr, Pb), format-independent
Switching	•	Passive
Impedence	• 75Ω
Insertion Loss	•	<3dB
Bandwidth	• >300MHz

Microphone Input Connectors

Inputs	•	4 3.5 miniature phone jacks
Input Sensitivity	•	10mVrms (400mV maximum input level)
Input Impedence	•	20kΩ (accepts balanced or unbalanced input signals)

Other

Trigger Outputs	•	1 power on/off and 1 programmable connector on
		detachable screw terminals (+12 VDC, 0.5 amps each)
RS-232 Serial Input/	•	2 9-pin D-sub connectors
Output
Power Requirements	• 90-250 VAC, 50-60Hz, 60W (universal line input), detach-
		able power cord
MC-12	•	Height (with feet): 5.2 inches (132mm)
Dimensions &	• Width: 17.3 inches (440mm)
Weight	• Depth: 14.85 inches (377mm)
	•	Weight: 36lbs (16.4kg)
MC-12 Balanced	•	Height (with feet): 6.63 inches (169mm)
Dimensions &	• Width: 17.3 inches (440mm)
Weight	• Depth: 14.85 inches (377mm)
	•	Weight: 45lbs (20.5kg)
Rack Mounting	•	Optional brackets are available for installation in a stan-
		dard 19" equipment rack (2 rack units required for MC-
		12; 3 rack units required for MC-12 Balanced.)
Environment	•	Operating Temperature: 0° to 35°C (32° to 95°F)
	•	Storage Temperature: -30° to 75°C (-22° to 167°F)
	•	Relative Humidity: 95% maximum without condensation
Remote Control	•	Hand-held, backlit infrared remote control unit
	•	Requires 2 AA batteries (Alkaline batteries recommended)

Specifications are subject to change without notice.

A-3