Lexicon MC-12 manual Mode Adjust, Input Source, Parameter Setting, Channel, Es Decoding: Auto

Mode Adjust Lexicon

DECODING

The DTS and DTS-ES listening modes are designed for, at a minimum, playback of 5.1-channel DTS, 5.1-channel matrix encoded DTS-ES, and 6.1-channel discrete-encoded DTS-ES sources.

DTS and DTS-ES listening mode names differ depending on the encoding present in the input source, the DECODING parameter setting, and the speaker setup.

DTS-ES listening modes are available when DTS-ES decoding is activated. The table at the bottom of the page shows the conditions for the behavior of DTS-ES decoding when it is activated.

•DTS-ES decoding is activated when both the side and rear speakers are present and the ES DECODING parameter is set to ON or AUTO and a 5.1-channel matrix-encoded or a 6.1-channel discrete-encoded DTS-ES source is detected.

•DTS-ES decoding is deactivated when the ES DECODING parameter is set to OFF or when the ES DECODING parameter is set to AUTO and a 5.1-channel DTS source is detected.

Note:

The table below is not applicable to the DTS-ES THX, DTS THX ULTRA2, and DTS THX MUSIC listening modes.

		Input Source
Parameter Setting	5.1-Channel DTS	5.1-Channel	6.1-Channel
		Matrix-Encoded DTS-ES	Discrete-Encoded DTS-ES
ES DECODING: AUTO	DTS	DTS-ES	DTS-ES
ES DECODING: ON	DTS-ES	DTS-ES	DTS-ES
ES DECODING: OFF	DTS	DTS	DTS

5-24