Lexicon MC-12 manual Lock Options, Setup, Parameter, Default Setting, Possible Settings

Setup Lexicon

LOCK OPTIONS

SETUP LOCK OPTIONS

Displays the LOCK OPTIONS menu, which protects MODE ADJUST, AUDIO CONTROLS, and SETUP menu branch parameter settings from accidental changes.

AUDIO CNTRL LOCKED, UNLOCKED

SETUP LOCK OPTIONS AUDIO CNTRL

MAIN MENU

MODE ADJUST AUDIO CONTROLS

SETUP

SETUP

INPUTS SPEAKERS

REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGERS

LOCK OPTIONS LIVE! CALIBRATION

LOCK OPTIONS

SETUP UNLOCKED AUDIO CNTRL UNLOCKED

MODES UNLOCKED

LOCKED

UNLOCKED

Protects AUDIO CONTROLS menu branch settings from accidental changes. When LOCKED is selected, AUDIO CONTROLS menu branch settings cannot be adjusted. When UNLOCKED is selected, AUDIO CONTROLS menu branch settings can be adjusted.

SETUP LOCKED, UNLOCKED

SETUP LOCK OPTIONS SETUP

Parameter		Default Setting		Possible Settings
MODES		UNLOCKED		LOCKED, UNLOCKED
AUDIO CNTRL		UNLOCKED		LOCKED, UNLOCKED
SETUP		UNLOCKED		LOCKED, UNLOCKED
MODES				LOCKED, UNLOCKED
SETUP	LOCK OPTIONS		MODES

Protects MODE ADJUST menu branch settings from accidental changes. When LOCKED is selected, MODE ADJUST menu branch settings – including all listening mode menu settings – cannot be adjusted. When UNLOCKED is selected, all MODE ADJUST menu branch settings can be adjusted.

Protects SETUP menu branch settings from accidental changes. When LOCKED is selected, SETUP menu branch settings cannot be adjusted. When UNLOCKED is selected, SETUP menu branch settings can be adjusted.

Note the following:

•When the MODES parameter is set to LOCKED, the up and down arrows can still be used to adjust subwoofer output levels applied to the selected listening mode when the Shift command bank is activated.

•When the SETUP parameter is set to LOCKED, the 2CH button can still be used to adjust the MAIN ADV menu ANALOG BYPASS parameter setting when the Shift command bank is activated.

•When the SETUP parameter is set to LOCKED, the 7/5 button can still be used to adjust the MAIN ADV menu INPUT SELECT parameter setting when the Shift command bank is activated.

3-70