NordicTrack NTL16920 Problem The walking belt slows when walked on, Power Cord, Move the key

PROBLEM: The walking belt slows when walked on

SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 8.

b. If the walking belt is overtightened, treadmill perfor-
mance may decrease and the walking belt may be-
come damaged. Remove the key and		UNPLUG THE
POWER CORD	. Using the allen wrench, turn both

rear roller adjustment bolts counterclockwise, 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each side of the walking belt 3 to 4 inches off the walking platform. Be careful to keep the walking belt centered. Plug in the power cord, in- sert the key, and run the treadmill for a few minutes. Repeat until the walking belt is properly tightened.

b

3”–4”

Rear Roller Adjustment Bolts

c. If the walking belt still slows when walked on, please call our Customer Service Department, toll- free.

PROBLEM: The walking belt is off-center or slips when walked on

SOLUTION:	a. If the walking belt is off-center, remove the key and		UN-
	PLUG THE POWER CORD	. If the walking belt has
	shifted to the left,	use the allen wrench to turn the left
	rear roller bolt clockwise 1/2 of a turn;		if the walking belt
	has shifted to the right,	turn the left rear roller bolt coun-
	terclockwise 1/2 of a turn. Be careful not to overtighten the
	walking belt. Plug in the power cord, insert the key, and
	run the treadmill for a few minutes. Repeat until the walk-
	ing belt is centered.

a

b. If the walking belt slips when walked on, first remove the

key and UNPLUG THE POWER CORD. Using the allen wrench, turn both rear roller bolts clockwise, 1/4 of a turn.

When the walking belt is correctly tightened, you should

be able to lift each side of the walking belt 3 to 4 inches off the walking platform. Be careful to keep the walking belt centered. Plug in the power cord, insert the key, and care- fully walk on the treadmill for a few minutes. Repeat until the walking belt is properly tightened.

b

PROBLEM: The incline of the treadmill does not change correctly or does not change when iFIT.com

CD’s and videos are played

SOLUTION:	a. With the key in the console, press one of the Incline buttons.		While the incline is changing, re-
	move the key.	After a few seconds, re-insert the key. The treadmill will automatically rise to the
	maximum incline level and then return to the minimum level. This will recalibrate the incline.

28