NordicTrack NTSY59210 user manual Arm Assembly

Arm Assembly	12				67
				66
12. Press four 40mm x 50mm Inner Caps (67) into
the Press Frame (12). Press eight Large Support				66
Rod Bushings (66) into the Press Frame.
Attach the Ball w/Threads (106), the Spring (107),			106	12
					66
and the 14mm Pin (56) to the Press Frame (12)			66		107
as shown.
					66
			67		56
				66	67
13. Attach the Press Frame (12) to the Press Top	13
Frame (13) with a Long Support Rod (59), two
					13
38mm Large Washers (81), and two M10 x 25mm
Bolts (82).		82	81
		12
				59
				81	82
14. Press two 56mm Round Inner Caps (71) into the	14				93
ends of the Left and Right Arms (8, 9). Slide four
				66
Long Handgrips (40) onto the Arms. Press four					66
31mm Round Inner Caps (50) into the Arms.				10
Press two Large Support Rod Bushings (66) into			9		89
the Press Bracket (10).
Orient the Left and Right Arms (8, 9) and the				50	8
				40 99
Press Bracket (10) as shown. Attach the Arms to					50
the Press Bracket with four M10 x 75mm Bolts		71			40
(99), four M10 Washers (89), and four M10 Nylon
Locknuts (93).
		50	40
				40	71
				50
15. Pull the Knob w/ Threads (106) out as far as it will	15			12
go. Align a hole in the Press Bracket (10) with the
				81
Knob, and engage the Knob into the hole.			82
Attach the Press Bracket (10) to the Press Frame			106
(12) with a Long Support Rod (59), two 38mm
			10
Large Washers (81), and two M10 x 25mm Bolts					81
(82).
					59
					82
	10