31.Wrap the High Cable (100) around a 115mm Pulley (54). Attach the Pulley to the bracket on the Press Base (1) with an M10 x 45mm Bolt (86) and an M10 Nylon Locknut (93).
32.Wrap the High Cable (100) around a 115mm Pulley (54). Attach the Pulley and a Cable Trap (52) to the bottom set of holes in the indicated pair of Pulley Plates (35) with an M10 x 50mm Bolt (77) and an M10 Nylon Locknut (93). Be sure the Cable Trap is turned to hold the Cable in the groove of the Pulley.
33.Route the High Cable (100) under a 115mm Pulley (54) and through the Press Upright (16). Attach the Pulley inside the Upright with an M10 x 65mm Bolt (88), two M10 Washers (89), two 15mm x 12mm Spacers (62), and an M10 Nylon Locknut (93).
34.Route the High Cable (100) under a 115mm Pulley (54) and through the Seat Frame (3). Attach the Pulley inside the Seat Frame with an M10 x 65mm Bolt (88), two M10 Washers (89), two 15mm x 12mm Spacers (62), and an M10 Nylon Locknut (93).
31 |
|
|
|
|
|
|
|
| 54 |
|
|
| 1 |
|
|
| 93 | 100 | 86 |
32 |
|
|
|
|
| 93 | 35 |
|
|
|
|
|
| |
| 54 | 77 |
| |
|
|
|
| |
|
| 52 |
|
|
|
| 100 |
|
|
33 |
|
|
|
|
| 93 89 62 |
|
| |
|
|
|
| 89 |
|
| 16 | 62 |
|
|
| 100 54 |
| 88 |
34 |
|
|
|
|
93 | 62 |
|
|
|
89 |
|
|
| |
|
| 89 |
|
|
| 3 | 62 |
|
|
| 54 |
|
| |
| 100 | 88 |
|
|
|
|
|
| |
15
