Setting up the handset

Setting up the handset

Before you use the handset, it is important that you read the safety information and perform the following steps:

1.Install the charger.

2.Install the batteries.

3.Charge the batteries.

4.Subscribe the handset to the DECT system.

Installing the charger

Place the charger on a flat, even surface. To operate the charger, a mains connection is required. Ensure that the mains voltage matches the adapter mains voltage. Connect the charger to the mains connection.

1.Connect the cable on the plug-in AC adapter to the terminal on the bottom of the charger.

2.Plug the AC adapter into the mains socket outlet.

CAUTION

Do not install the charger, handset, and accessories near:

water, moisture, or dampness

sources of heat and direct sunlight

devices that generate strong magnetic fields, electrical appliances, fluorescent lamps, computers, radios, televisions, or fax and telephone terminals

12

Page 12
Image 12
Nortel Networks 4025 manual Setting up the handset, Installing the charger