102
Wireless handset certification
WLAN Application Gateway 2246 installation on new system
If this is a new system installation, continue with WLAN Handset 2210/2211 registration and Call Server programming. When the wireless handset installation is complete, perform the usual voice and coverage tests.
WLAN Application Gateway 2246 installation on existing system
Follow the steps to certify the wireless handsets on an existing system.
Certifying the wireless handsets on an existing system
1Place a test call.
2Test the features on each WLAN Handset 2210/2211 to ensure the system is working properly.
3Test the application on each WLAN Handset 2210/2211.
4Consult the application provider for specific test procedures.
Updating software
The WLAN Application Gateway 2246 and the WLAN Handsets 2210/2211 use proprietary software programs. The software versions that are running on the system components can be displayed through the System Status screen.
Nortel Networks provides information about software updates, and how to obtain the software (for example, downloading from the Nortel Networks web site).
Software updates on MOG700 systems
After software updates are obtained from Nortel Networks, they must be transferred to the appropriate location in the LAN. This enables the corresponding system components to access and update their software. The FTP (File Transfer Protocol) method of transfer is used.
In the WLAN Application Gateway 2246, the flash file system has the following files shown in Table 11:
Table 11 Software files
File name | Description |
|
|
config.bin | OAI box configuration |
|
|
fnctla.bin | functional code |
|
|
oaiptlst.bin | phone list configuration |
|
|
oaipttlsb.bin | redundant phone list configuration |
|
|
Appendix B: WLAN Application Gateway 2246
