Nortel Networks MOG6xx Programming a feature, The Telephone Line Configuration screen appears

95

1From the NetLink OAI System screen, select Telephone Line Configuration and press Enter.

The Telephone Line Configuration screen appears.

2Select the field to use as the search key (MAC Address, Name, or Extension),

3Press S to display a search screen dialog box.

4Type an appropriate search string.

5Press Enter.

The success or failure of the search is displayed at the bottom of the screen.

6Continue to change the search string for different search criteria or exit by pressing the Esc key.

The first line of the Telephone Line Configuration or Telephone Line Status screen displays the line in which the search match is found.

Successful searches always have the first found match at the top of the list.

Note: Partial strings match for beginnings of strings, (for example, a search for extension 10 matches extensions 10, 100, 1000, and so on, but will not match 010).

Programming a feature

The application function is accessed in the WLAN Handset 2210/2211 by pressing the FCN button plus a second button. The button used to access the application feature from the wireless handset is configured through the Feature Programming option.

Note: FCN 1-6 are hard-coded. If the application function is programmed to use FCN 1-6, the hard-coded function is overridden. Nortel Networks recommends using 7, 8, or 9 for the application function.

Follow the steps to program an application feature for the wireless handsets.

Perform the following steps to program a feature.

1From the NetLink OAI System screen, select Feature Programming and press Enter. The Feature Programming screen appears. See Figure 25 on page 96.

Appendix B: WLAN Application Gateway 2246