87
Connecting through a serial port
1Connect the WLAN Application Gateway 2246 to the serial port of a terminal or PC using a
Figure 19 Cable to port connection
LAN
Ethernet
switch
WLAN Application
Gateway 2246
Terminal or PC
2Run a terminal emulation program (such as HyperTerminal™), or use a
—Bits per second: 9600
—Data bits: 8
—Parity: None
—Stop bits: 1
—Flow control: None
Note: If using Windows 2000, Service Pack 2 must be installed to enable the use of HyperTerminal™.
3Reset the system.
The following appears on the terminal:
04830130
4Type the following command using the terminal or PC keyboard:
0255CC [CTRL M] [CTRL J]
The command does not display on the screen as it is typed.
The login screen appears. If an error was made when entering the command string, the message “Ill Formed Packet” appears. It appears as a series of numbers followed by some form of the typed command. If this occurs, repeat Step 3 and Step 4.
Appendix B: WLAN Application Gateway 2246