93
Configuring the Telephone Line
Each WLAN Handset 2210/2211 that uses the application’s features must be configured with its line number and MAC address. The name and extension number of the WLAN Handset 2210/ 2211 user can be entered. Obtain this information from the WLAN Handset 2210/2211 Planning Worksheet. See Planning Worksheet for WLAN Handsets 2210/2211 on page 106.
The WLAN Handsets 2210/2211 require special configuration. This can include configuring options on the DHCP server or on the WLAN Handset 2210/2211 to allow it to communicate with the WLAN Application Gateway 2246. Be sure these setting are correct. Refer to Configuring the WLAN Handsets 2210/2211 on page 60 for more information.
The system does not allow the same WLAN Handset 2210/2211 to register to two different lines. Use Esc to cancel any unwanted transaction.
Follow the steps to configure the telephone lines for the application.
Configuring a telephone line:
1From the NetLink OAI System screen, select Telephone Line Configuration and press Enter.
The Telephone Line Configuration screen appears. See Figure 24.
Figure 24 Telephone Line configuration
2Use the arrow keys to navigate to the Name and Extension fields.
3Enter the associated data for the wireless handsets.
Appendix B: WLAN Application Gateway 2246
