Nortel Networks NN43001-318 manual Procedure Installing the BRSC, SILC, and Uilc

Models: NN43001-318

1 108
Download 108 pages 20.36 Kb
Page 22
Image 22

22Installing ISDN BRI hardware

1Hold the MISP by its card-locking devices. Squeeze the tabs to unlatch the card-locking devices and lift the tabs out and away from the card.

2Carefully remove the MISP from its card slot, and slowly slide the card from the module.

—End—

Procedure 5

Installing the BRSC, SILC, and UILC

Step Action

After MISPs are installed, install SILCs, UILCs, and BRSCs, as required. As the cards are installed, keep a list of the card type (BRSC, SILC or UILC), the module number, and the number of the card slot containing the card. Use the Core/Network Module card location form or the IPE Module card location form at the end of this chapter to document this information.

1Hold the card by its card-locking devices. Squeeze the tabs to unlatch the card-locking devices and lift them away from the card.

2Insert the BRSC, SILC, or UILC into the selected card slot of the module so it engages the card guides in the module.

3Slide the BRSC, SILC, or UILC into the module until it engages the backplane connector.

4Push the card firmly into the connector using the locking devices as levers by pushing them toward the card’s front panel.

5Push the tabs firmly against the front panel of the card so they latch to the front lip in the module and to the post on the card.

6Observe the red LED located on the faceplate.

If the red LED turns on and stays lit continuously, the card is defective. Remove the card, choose a new card, and repeat the installation procedure.

If it flashes three times and then turns off, the card is operating correctly. Go to step 7.

If the red LED flashes three times and then stays lit continuously, the card is operating correctly but is not configured. Go to step 7.

7On the CE or IPE Module card location form, fill in the card type and the module number next to the slot number of the installed card.

Nortel Communication Server 1000

ISDN Basic Rate Interface Installation and Commissioning

NN43001-318 01.02 Standard

Release 5.0 20 June 2007

Copyright © 2003-2007, Nortel Networks

Page 22
Image 22
Nortel Networks NN43001-318 manual Procedure Installing the BRSC, SILC, and Uilc

NN43001-318 specifications

Nortel Networks NN43001-318 is a sophisticated telecommunications component that plays a pivotal role in networking technologies. Designed for high-performance networking environments, this modular circuit pack is part of Nortel's long-standing reputation for reliability and efficiency in communication systems.

One of the standout features of the NN43001-318 is its support for advanced digital processing capabilities, which allows for the seamless transmission of data across various network formats. This circuit pack serves as a bridge between legacy systems and modern digital infrastructures, facilitating smooth upgrades and integration. Its versatility makes it suitable for a range of networking applications, from small businesses to large enterprises.

The NN43001-318 is equipped with multiple interfaces, allowing it to connect with various types of network equipment effortlessly. This characteristic is particularly advantageous for organizations looking to expand their network capabilities without a complete overhaul. The modular nature of the component ensures that it can be easily replaced or upgraded, thus prolonging the lifespan of overall network systems.

In terms of technological advancements, the NN43001-318 leverages multiple protocols to ensure reliable communications across diverse platforms. It supports Voice over IP (VoIP) technologies, which enhances the quality of voice communications while reducing costs associated with traditional telephony. Additionally, the circuit pack is designed to minimize latency, making it ideal for real-time applications where speed and efficiency are critical.

Security is another integral aspect of the NN43001-318, supporting encryption protocols to secure data transmission. This is essential in today's environment, where cybersecurity concerns are paramount. The combination of advanced encryption and robust processing power ensures that sensitive information remains protected, giving organizations peace of mind.

Moreover, the NN43001-318 aids in improving network management through its built-in diagnostic capabilities. These features allow network administrators to monitor performance and troubleshoot potential issues proactively, enhancing overall service quality.

In summary, Nortel Networks NN43001-318 is a versatile and powerful circuit pack that embodies the cutting-edge technologies required for modern networking. Its ability to support various protocols, combined with secure communications and efficient management features, makes it a valuable asset for any organization looking to enhance its networking infrastructure.