- 22 -
MAS commissioning
— RFC2833
Attention: If you remove all methods, inband DTMF detection is forced, which is not recommended because it degrades system capacity.
•Configure the preferred order of enabled DTMF relay methods for negotiation (SDP answer) or default SDP (SDP offer).
•Configure the RFC2833 payload type. Nortel recommends that you select the default payload type, which is determined dynamically. However, some clients require a fixed payload type.
Conferencing
To configure conferencing, use the Nortel MAS Console. You can configure the following conferencing properties:
•Enable or disable the Automatic Gain Control. The default is enabled.
•Enable or disable the Customized Replacement Video property. When enabled,
•Enable or disable the Lock Video Format on First Party in Conference property.
When enabled, the first party determines the video format. If the first party is
•Enable or disable the Replacement Video For Active Speaker property. When enabled, the active speaker receives replacement video in conferences where one or more than two (but not two) parties are enabled to speak. The default is enabled.
•For the Silent Conference Teardown Delay (sec) property, configure the number of seconds a conference must be silent before it is terminated (0 indicates no termination). The default value is one hour.
Quality of Service
MAS supports Differentiated Services (DiffServ) packet marking on outgoing
Nortel Media Application Server 6.0 for AS 5300
Fundamentals
Release 6.0 03 June 2008
Copyright © 2008, Nortel Networks