32DC power supply installation
CAUTION
Risk of equipment damage
To prevent damage from electrostatic discharge, always wear an antistatic wrist strap connected to an ESD jack.
DANGER
Risk of injury by electric shock
Before working on this equipment, be aware of proper safety practices and the hazards involved with electrical circuits. Use only power cords that have a grounding path. Ensure the switch is properly grounded before powering on the unit.
Procedure steps
Step Action
1Switch off the power supply.
See the following figure for the exact location of the power switches.
2Remove the filler panel from the power bay if necessary.
CAUTION
Save the power filler panel in case you need to operate the Ethernet Routing Switch 8300 chassis with a power supply removed.
3If you are replacing a failed power supply, remove the failed DC power supply.
4Grasp the handle of the new power supply.
Nortel Ethernet Routing Switch 8300
Installation — DC Power Supply
9 June 2008
Copyright © 2008 Nortel Networks
