34DC power supply installation
10Attach the positive voltage lead to the positive terminal on the power supply and insert a lock washer between the crimp lug and each hex nut.
11Attach the negative voltage lead to the negative terminal on the power supply to insert a lock washer between the crimp lug and each hex nut.
12Use a 7/16 inch hex wrench to tighten the hex nut on each terminal.
13Attach the earth ground cable to the system or rack ground for your DC input power source.
14Use a Phillips screwdriver to replace the plastic safety cover on the power supply.
Nortel Ethernet Routing Switch 8300
Installation — DC Power Supply
9 June 2008
Copyright © 2008 Nortel Networks
